Worked Examples Revision: How to Study Them in Maths and Physics
Worked examples revision made simple: study a full solution, then a part-finished one, then solve alone. A routine for GCSE maths and physics.
To revise from worked examples, study one fully solved question and explain each step to yourself. Then complete a part-finished question, then solve a fresh one with nothing in front of you. Beginners in a topic gain most from this. Once you can solve new questions alone, switch to independent practice.
Many students read a solution, think “that makes sense”, and move on. Then the exam asks a slightly different question and the method is gone. The problem is reading it passively.
This guide shows a way to use worked examples that makes you do the thinking. It works for any topic with a clear method, and the routine below uses one GCSE maths topic and one physics topic.
What the research says, and what it does not
An IES practice guide written by a panel of researchers and teachers recommends that, when teaching mathematical or science problem solving, teachers interleave worked example solutions and problem-solving exercises. The guide’s wording is “literally alternating between worked examples demonstrating one possible solution path and problems that the student is asked to solve”. The panel rated the level of evidence as moderate.
The same guide says that, as students develop greater expertise, decreased example use and increased problem solving appears to improve learning. It also says gradually “fading” examples into problems, by giving early steps and asking students for more of the later steps, seems to benefit learning.
Those three ideas are the whole routine: alternate, fade, then drop the examples. One caution. The guide was written for teachers, and it does not promise a grade jump. Treat it as a good reason to try the method.
The three-stage routine
Pick one question type, for example “solve a linear equation with brackets” or “calculate kinetic energy”. Do not mix topics yet.
- Study a full example. Cover the solution, read the question, then uncover one line at a time.
- Complete a part-finished example. The first lines are given, you write the rest.
- Solve a fresh question alone, with the example hidden.
Then check your answer and, if you slipped, go back one stage.
Stage 1: study a full example, and explain every line
The skill here is self-explanation. For each line, say or write why it is there, for example “subtract 5 from both sides to get the x term on its own”.
Use these prompts on every step:
- What changed between this line and the last one?
- Which rule or equation lets you do that?
- What would go wrong if this step were skipped?
If you cannot answer one of them, stop. That is the gap to fix before you go on.
Stage 2: complete a part-finished example
Take a second question of the same type. Use a question where the opening steps are already written, either one you prepare by copying the first lines of a solution, or one a teacher gives you. You complete the rest.
This is the “fading” the guide describes. Over several questions, give yourself less each time: first the opening is given, then only the first line, then nothing.
Stage 3: solve alone
Close the notes. Do a fresh question of the same type, then mark it line by line against the full solution. A right answer reached by luck tells you little. UpGrades checks your answers and gives step-by-step explanations.
A maths routine: solving equations with brackets
Say your topic is equations such as 3(x + 2) = 21.
First, study this full example. Read each line and explain it aloud.
3(x + 2) = 21
3x + 6 = 21
3x = 15
x = 5
Your explanations might be: “I multiplied the bracket out, 3 times x and 3 times 2”, “I took 6 from both sides”, “I divided both sides by 3”.
Second, do this part-finished one: 4(x + 3) = 32. The first line is given: 4x + 12 = 32. You write the rest.
Third, solve 5(x + 4) = 45 alone, then a version with a negative sign, such as 2(x − 3) = 14. Mark the working against a model solution.
Use the fresh questions to test whether you understand. If you only managed it because the numbers looked the same as the example, change the structure: put the bracket on both sides, or use a fraction.
A physics routine: kinetic energy
Take the topic “calculate kinetic energy”. The equation is kinetic energy = 0.5 × mass × speed squared.
Full example: a 2 kg trolley moves at 3 m/s. Kinetic energy = 0.5 × 2 × 3 squared = 0.5 × 2 × 9 = 9 J. Explain why the speed is squared first, why the unit is joules, and what you would do differently if the mass were in grams.
Part-finished example: a 4 kg trolley moves at 5 m/s. The first line is given: kinetic energy = 0.5 × 4 × 5 squared. You finish it and add the unit.
Solve alone: a 0.5 kg ball moves at 6 m/s. Then try a rearranged question, such as finding the speed when you are told the energy and the mass. Rearranging is a separate skill, so give it its own stage.
Finding worked examples
Your class notes and textbook will have them. Mark schemes are another source once you have attempted a paper. Exam boards publish past papers and mark schemes: AQA has a past paper finder, and Pearson describes a large library of past exam papers and mark schemes that it says are free to teachers and students. The past papers page lists where to start.
A mark scheme is a thin worked example. It gives the marks and leaves out the reasoning. Add the “why” to each line yourself, in pencil, so you have your own full example next time.
When to stop and switch to independent problems
The guide says example use should decrease as expertise grows. In practice, move on when:
- you can solve three fresh questions of the type in a row without looking
- you can explain each step in your own words
- a slightly changed version (a different unit, a rearranged equation, a negative number) does not throw you
After that, mix question types and add a timer. If you keep getting one type wrong, go back to Stage 1 for that type only.
A short session might look like this: 5 minutes on a full example, 10 minutes on part-finished ones, 15 minutes on solo questions, 5 minutes marking. Put the sessions in the revision planner. Come back to the topic a few days later with solo questions only. That fits well with the spacing ideas in the post on spaced repetition, and the maths-specific habits in 10 GCSE maths revision tips pair well with this routine.
Frequently asked questions
What is a worked example in revision?
It is a question that has already been solved step by step, usually in a textbook, a teacher's notes or a mark scheme. You study the solution to see how each line follows from the one before.
How many worked examples should I read before trying a question myself?
One is usually enough for a new question type. Read it, explain it, then try a similar question straight away rather than reading a pile of solutions first.
Can I just read mark schemes as worked examples?
Yes, but only after you have had a go at the question yourself. A mark scheme shows the answer and the marks, but it often skips the reasoning, so you may need to fill in the missing steps in your own words.
When should I stop using worked examples?
Stop when you can solve a fresh question of that type without looking, and explain why each step is there. From then on, mixed questions and timed practice will teach you more.
Do worked examples work for subjects other than maths and physics?
They suit any subject where there is a clear method, such as chemistry calculations or some parts of biology. They are less useful for essay subjects, where a model answer is better used for comparison after you have written your own.
You might also like
Revision Mistake Log: How to Learn from Wrong Answers (Template)
A revision mistake log turns wrong answers into marks. What to record, four ways to sort errors, a w…
study-techniquesMind Mapping for GCSE History Revision
Learn how to use mind maps for GCSE History revision. Connect events, causes, and consequences visua…
study-techniquesHow to Use Flashcards for GCSE Revision
Learn how to use flashcards effectively for GCSE revision. Create, organise, and review flashcards u…
study-techniquesHow to Revise for GCSEs: 15 Proven Strategies
How to revise for GCSE maths and all subjects effectively — 15 evidence-based strategies from active…
Want to learn how UpGrades helps students revise smarter? See how it works →
Related Guides
GCSE Revision Guide 2026: Strategies That Work
Complete GCSE revision guide backed by learning science. Effective study techniques, timetable templates, and exam strategies that improve your grades.
guidesIs the EPQ Worth It? UCAS Points, Workload and a Decision Checklist
What the Extended Project Qualification is, how many UCAS points each grade is worth, what it costs in time, and a checklist to decide if it suits you.
guidesDo You Have to Resit GCSE Maths? What Happens If You Miss a Grade 4
No grade 4 in GCSE maths or English? How the post-16 resit rule works for sixth form and college, GCSE versus Functional Skills, and the November resit.
guidesUCAS Personal Statement Questions: The 3 Questions and a Year 12 Plan
The three UCAS personal statement questions, the 4,000 character limit, the 350 character minimum per answer, and a summer plan for Year 12.